Non-metallic multilayer reflector for a backlight recycling cavity. Published caliper 82 ±4 µm and minimum reflectivity 98%. Confirm the specified wavelength range and interfaces.
Representative illustration; configuration and dimensions are defined by the application drawing.
Pricing is available by quotation. Save products to your Interest List to request a quote for several items, or contact us about this product.
Referencia interna:
BFM-03033-00
Reflector materials return stray light to the backlight cavity. Specular and diffuse constructions redistribute light differently; select the surface and reflectance spectrum to suit the light guide, LED spacing and required uniformity.
Define the cut outline, usable aperture, thickness, tabs, notches, corner radii and tolerances. Identify prism direction or transmission axis, structured/coated face, liner handling and a physical orientation datum. A 0° or 45° catalog reference must be tied to the drawing datum.
Use the material in a custom optical stack or evaluate it against the original film in an existing backlight. Review luminance, uniformity, viewing angle, polarization, color and temperature behavior. Repair acceptance is based on the assembled display and agreed requirements; a similar gauge or family name does not establish equivalence.
Start with the application and available space. Develop a drawing with custom dimensions and performance specifications, review the proposed configuration, and evaluate samples where needed. Record the approved drawing revision and acceptance criteria for the supplied part. Availability and final configuration are confirmed during quotation.
Review the document revision and exact grade or ordering code. Family guidance may describe a different construction; final limits belong to the selected part specification.