Displays

[LRA-03003-00] LRA / Custom Dual-Mode Day and NVIS Night LED Rail / Design Reference

LRA / Custom Dual-Mode Day and NVIS Night LED Rail / Design Reference

PN: LRA-03003-00

Custom rail with separately driven day and filtered night channels. Define optical isolation, drive leakage, source/filter geometry and thermal design. Check phosphor fluorescence from unpowered day LEDs. No completed or qualified assembly is represented.

Development reference — further design or fit verification required. No target LCD has been selected. Confirm mechanical, electrical, optical and thermal compatibility before release.

[LRA-03002-00] LRA / Custom Filtered NVIS Night LED Rail / Design Reference

LRA / Custom Filtered NVIS Night LED Rail / Design Reference

PN: LRA-03002-00

Custom night-channel rail design reference using source-matched infrared filters in chip, strip, cap or rail form. Specify NVIS class and output color separately. Define full light sealing, source spectrum, filter thermal clearance and assembly radiance test. No released or qualified design is represented.

Development reference — further design or fit verification required. No target LCD has been selected. Confirm mechanical, electrical, optical and thermal compatibility before release.

[LRA-03001-00] LRA / Custom White Daylight LED Rail / Design Reference

LRA / Custom White Daylight LED Rail / Design Reference

PN: LRA-03001-00

Custom white-LED rail design reference. Define target LCD, length/width/height, emitting height, LED selection and pitch, current/string topology, connector/pinout, thermal interface, color bin and dimming. No completed rail, drawing or measured performance exists for this reference.

Development reference — further design or fit verification required. No target LCD has been selected. Confirm mechanical, electrical, optical and thermal compatibility before release.

[IRF-03025-00] IRF / Hot mirror, 45° incidence, 12.5 mm diameter / 12.5 mm diameter / 45° incidence

IRF / Hot mirror, 45° incidence, 12.5 mm diameter / 12.5 mm diameter / 45° incidence

PN: IRF-03025-00

Visible-transmitting, infrared-reflecting mirror for 45° incidence. Diameter 12.5 mm; thickness 1.10 ±0.20 mm. Average transmission exceeds 85% over 400–690 nm and average reflectance exceeds 95% over 750–1125 nm. No NVIS qualification is implied.

Development reference — further application development and verification required. Define the source, geometry, spectral limits and operating conditions before release. Finished-display NVIS compliance is not established.

[IRF-03024-00] IRF / Custom hybrid NVIS filter

IRF / Custom hybrid NVIS filter

PN: IRF-03024-00

Custom absorbing, reflective or combined filter for source-level, light-guide or display-window integration. Qualify the actual construction and source together.

Development reference — further application development and verification required. Define the source, geometry, spectral limits and operating conditions before release. Finished-display NVIS compliance is not established.

[IRF-03023-00] IRF / Custom laminated or monolithic NVIS filter

IRF / Custom laminated or monolithic NVIS filter

PN: IRF-03023-00

Custom source or display filter using glass, polymer, coating or laminated construction. Define the required NVIS class, output color, environment and complete spectral limits.

Development reference — further application development and verification required. Define the source, geometry, spectral limits and operating conditions before release. Finished-display NVIS compliance is not established.

[IRF-03022-00] IRF / Custom NVIS interference filter, design family 02

IRF / Custom NVIS interference filter, design family 02

PN: IRF-03022-00

Custom infrared-blocking coating on glass for NVIS or dual-mode backlights. Specify the LED spectrum, cutoff, transition slope, blocking band, angle range and chip, strip or window dimensions.

Development reference — further application development and verification required. Define the source, geometry, spectral limits and operating conditions before release. Finished-display NVIS compliance is not established.

[GLS-500007-00] IRF / Green-output absorbing filter glass, 2.00 mm

IRF / Green-output absorbing filter glass, 2.00 mm

PN: GLS-500007-00

Absorbing glass for NVIS Green A output development. Nominal thickness 2.00 mm. Published luminance transmission ranges from 17.8% to 18.7% across three specified white LEDs.

Development reference — further application development and verification required. Define the source, geometry, spectral limits and operating conditions before release. Finished-display NVIS compliance is not established.

[GLS-500006-00] IRF / White-output absorbing filter glass, 0.50 mm

IRF / White-output absorbing filter glass, 0.50 mm

PN: GLS-500006-00

Thin absorbing glass for white-output NVIS development. Nominal thickness 0.50 mm. Published luminance transmission ranges from 36.5% to 38.5% across four specified LED sources.

Development reference — further application development and verification required. Define the source, geometry, spectral limits and operating conditions before release. Finished-display NVIS compliance is not established.

[GLS-500005-00] IRF / Heat-absorbing filter glass, material 05

IRF / Heat-absorbing filter glass, material 05

PN: GLS-500005-00

Heat-absorbing glass with data referenced to 2 mm thickness. Internal transmission limits are 0.14 at 800 nm and 0.03 at 900 nm. Absorbed optical power heats the component.

Development reference — further application development and verification required. Define the source, geometry, spectral limits and operating conditions before release. Finished-display NVIS compliance is not established.

[GLS-500004-00] IRF / Near-IR absorbing glass, material 04

IRF / Near-IR absorbing glass, material 04

PN: GLS-500004-00

Near-infrared absorbing glass for spectral attenuation or hybrid filter assemblies. Reference data uses 1 mm thickness. No standalone NVIS compliance is established.

Development reference — further application development and verification required. Define the source, geometry, spectral limits and operating conditions before release. Finished-display NVIS compliance is not established.

[GLS-500003-00] IRF / Green-output absorbing filter glass, material 03

IRF / Green-output absorbing filter glass, material 03

PN: GLS-500003-00

Absorbing glass for NVIS Green A output development, with data referenced to 3 mm thickness. Verify transmission at the actual supplied gauge.

Development reference — further application development and verification required. Define the source, geometry, spectral limits and operating conditions before release. Finished-display NVIS compliance is not established.

[GLS-500002-00] IRF / Green-output absorbing filter glass, material 02

IRF / Green-output absorbing filter glass, material 02

PN: GLS-500002-00

Absorbing glass for NVIS Green A output development, with data referenced to 2 mm thickness. Output color does not establish goggle Class A compliance.

Development reference — further application development and verification required. Define the source, geometry, spectral limits and operating conditions before release. Finished-display NVIS compliance is not established.

[GLS-500001-00] IRF / White-output absorbing filter glass, material 01

IRF / White-output absorbing filter glass, material 01

PN: GLS-500001-00

Absorbing glass for white-output NVIS development. At 1 mm reference thickness, internal transmission is at least 0.83 at 500 nm and at most 0.19 at 600 nm. Surface reflection is excluded.

Development reference — further application development and verification required. Define the source, geometry, spectral limits and operating conditions before release. Finished-display NVIS compliance is not established.

[IRF-03014-00] IRF / Multicolor NVIS coating family

IRF / Multicolor NVIS coating family

PN: IRF-03014-00

Interference-coating family for multicolor NVIS display development. Select the spectral edge, substrate, source chromaticity and incidence-angle range together.

Development reference — further application development and verification required. Define the source, geometry, spectral limits and operating conditions before release. Finished-display NVIS compliance is not established.

[IRF-03013-00] IRF / NVIS display-overlay filter family

IRF / NVIS display-overlay filter family

PN: IRF-03013-00

Polymer filter family for installation over a display, with nominal luminance-transmission options of 20% or 30%. Select the exact construction and verify the complete display. Direct LED contact is unqualified.

Development reference — further application development and verification required. Define the source, geometry, spectral limits and operating conditions before release. Finished-display NVIS compliance is not established.

[IRF-03012-00] IRF / Custom IR-absorbing polymer filter

IRF / Custom IR-absorbing polymer filter

PN: IRF-03012-00

Custom infrared-absorbing polymer in film, sheet or formed geometry. Specify actual thickness, wavelength-resolved blocking, temperature and source compatibility.

Development reference — further application development and verification required. Define the source, geometry, spectral limits and operating conditions before release. Finished-display NVIS compliance is not established.

[IRF-03011-00] IRF / Colored NVIS filter cap family

IRF / Colored NVIS filter cap family

PN: IRF-03011-00

Colored polymer cap family for SMD LEDs. Select output color, LED spectrum, package geometry and class-specific radiance limits as one configuration.

Development reference — further application development and verification required. Define the source, geometry, spectral limits and operating conditions before release. Finished-display NVIS compliance is not established.

[IRF-03010-00] IRF / Multicolor-display NVIS filter cap for SMD LEDs

IRF / Multicolor-display NVIS filter cap for SMD LEDs

PN: IRF-03010-00

Polymer cap for an SMD LED used in a multicolor display backlight. Published photopic transmission 24%. Match the LED spectrum, package and required NVIS class.

Development reference — further application development and verification required. Define the source, geometry, spectral limits and operating conditions before release. Finished-display NVIS compliance is not established.

[IRF-03009-00] IRF / White-output NVIS filter cap for SMD LEDs

IRF / White-output NVIS filter cap for SMD LEDs

PN: IRF-03009-00

Polymer cap covering the top and sides of an SMD LED. White-output design with published photopic transmission 36% for a cool-white source. Match the LED package and seal bypass paths.

Development reference — further application development and verification required. Define the source, geometry, spectral limits and operating conditions before release. Finished-display NVIS compliance is not established.

1
…
3
4
5
6