NVIS Display Engineering — Spectra, Optics and Compatibility

Explore NVIS display engineering through 24 chapters on spectra, standards, optical stacks, reflection control, dimming and measurement.

Sign in to continue.

Use Back and Forward beneath the video to browse reading pages without interrupting playback. Follow along with the Chapter PDF, Glossary and references.

Discussion

General NVIS questions and feedback · Learner discussion

Chapters

1. Welcome & Introduction
2. The display and the two viewing tasks
3. From MIL-L-85762A to MIL-STD-3009
4. Types classes colors and the requirement boundary
5. Night-Vision Technologies: What Each System Sees
6. How image-intensifier goggles work
7. The display in the shared lighting environment
8. Reading spectra and keeping units consistent
9. Measuring NVIS weighted radiance
10. LEDs and the origin of their spectra
11. RGB versus white backlights
12. The LCD stack and the spectral budget
13. Follow the light from backlight to viewer
14. Absorbing interference and hybrid filters
15. Filters in front of and behind the display
16. Filters over LEDs and backlight rails
17. Leakage and equal-output comparisons
18. Dimming ratio and low-level control
19. Daylight contrast and the brightness budget
20. Modes transitions and fault behavior
21. A practical measurement and verification program
22. Product cases and architecture selection
23. Workbook and facilitated laboratories
24. Assessment and answer key

Development edition. Videos are available for Chapters 1–3; later chapters currently provide reading pages and follow-along PDFs.