Retrofit rails and kits
Compare channel size, rail length, emitting height, LED pitch, connector and driver requirements. Display fit remains unverified until the target LCD is reviewed.
Backlight Optics / LEDs and LED Rails
Light sources that fit the display.
Assess a retrofit rail or kit, develop a custom rail, or choose individual white LEDs. Match source position and emission to the light guide, drive electronics, thermal path and day/night requirements.
LRA items require further development or display-fit verification. No target LCD has been selected. Dimensions or nominal display size alone do not establish compatibility; custom references do not represent completed or qualified assemblies.
Add items to your Interest List for application review and quotation. Selection does not confirm stock, price, fit or design release.
Choose the right starting point.
Start with retrofit candidates, move to a custom rail when needed, or select individual LEDs for a new assembly.
Custom LED rails
Develop the PCB outline, mounting, thermal path and electrical interfaces around the backlight. Define separate daylight and filtered night channels where required.
Individual white LEDs
Compare package and emission geometry, color, drive current and thermal requirements. Use the selected ordering code and datasheet for the rail design.
Explore by function.
Open a group to compare descriptions and select references.
Retrofit rails and kits (7 references)
Candidates for an existing backlight. Confirm channel fit, emitting-face alignment, source spacing, connector, polarity and driver requirements.
Representative rail photograph; display fit requires verification.
LRA / White LED Rail / 220 ×5.1 ×2 mm / 6500 K
PN: LRA-03004-00
Further development requiredLegacy standard rail: 220 ×5.1 ×2 mm; 6.5 mm LED spacing; 6500 K; listed input 1100 mA and 9.6 V. Drawing associates it with a matching light guide. Confirm current availability and drive limits. Development reference — further design or fit verification required. No target LCD has been selected. Confirm mechanical, electrical, optical and thermal compatibility before release.
Representative rail photograph; display fit requires verification.
LRA / White LED Rail / 258 ×5.1 ×2 mm / 6500 K
PN: LRA-03005-00
Further development requiredLegacy standard rail: 258 ×5.1 ×2 mm; 6.9 mm LED spacing; 6500 K; listed input 1200 mA and 9.6 V. Confirm current availability and exact mechanical/driver configuration. Development reference — further design or fit verification required. No target LCD has been selected. Confirm mechanical, electrical, optical and thermal compatibility before release.
Representative rail photograph; display fit requires verification.
LRA / White LED Rail / 321 ×5.1 ×2 mm / 6500 K
PN: LRA-03006-00
Further development requiredLegacy standard rail: 321 ×5.1 ×2 mm; 6.9 mm LED spacing; 6500 K; listed input 1500 mA and 9.6 V. Confirm current availability and exact mechanical/driver configuration. Development reference — further design or fit verification required. No target LCD has been selected. Confirm mechanical, electrical, optical and thermal compatibility before release.
LRA / Custom LCD LED Modification Kit / Family Reference
PN: LRA-03007-00
Further development requiredDisplay-specific modification-kit family with a custom LED rail, LED driver, cables and installation materials as required. Exact kit PN and controlled drawings depend on the selected LCD. High-bright and dual-mode NVIS configurations require a display-specific design; no kit qualification is assigned here. Development reference — further design or fit verification required. No target LCD has been selected. Confirm mechanical, electrical, optical and thermal compatibility before release.
LRA / Cut-to-Fit LED Kit / 336 ×2 ×2 mm / Single Strip
PN: LRA-03008-00
Further development requiredKit includes one 336 ×2 ×2 mm strip, driver and harness. Listed 57 LEDs; trim only at designated three-LED increments. Driver input 9–30 V DC. Check electrical and optical fit; the diagonal range is a selection guide. No standalone PDF retrieved. Development reference — further design or fit verification required. No target LCD has been selected. Confirm mechanical, electrical, optical and thermal compatibility before release.
LRA / Cut-to-Fit LED Kit / 540 ×4 ×2 mm / Dual Strip
PN: LRA-03009-00
Further development requiredLegacy sheet specifies two 540 ×4 ×2 mm strips with 96 LEDs per strip, driver and harness; designated three-LED cutting increments. Listed driver input 9–30 V DC. Confirm current SKU cross-reference and specifications before purchase. Development reference — further design or fit verification required. No target LCD has been selected. Confirm mechanical, electrical, optical and thermal compatibility before release.
LRA / Cut-to-Fit LED Kit / 620 ×4 ×2 mm / Dual Strip
PN: LRA-03010-00
Further development requiredKit sheet specifies two 620 ×4 ×2 mm strips with 99 LEDs per strip and a two-strip driver. Trim only at designated three-LED increments. Input is inconsistent within the sheet: 10–30 V in the specification and 9–30 V in the pin legend. Confirm the current driver rating and matched strip loading. Development reference — further design or fit verification required. No target LCD has been selected. Confirm mechanical, electrical, optical and thermal compatibility before release.
Custom LED rails (3 references)
Daylight, filtered night and dual-mode starting points. Define the rail geometry, channels, connector, electrical drive, optics and acceptance tests.
LRA / Custom White Daylight LED Rail / Design Reference
PN: LRA-03001-00
Further development requiredCustom white-LED rail design reference. Define target LCD, length/width/height, emitting height, LED selection and pitch, current/string topology, connector/pinout, thermal interface, color bin and dimming. No completed rail, drawing or measured performance exists for this reference. Development reference — further design or fit verification required. No target LCD has been selected. Confirm mechanical, electrical, optical and thermal compatibility before release.
LRA / Custom Filtered NVIS Night LED Rail / Design Reference
PN: LRA-03002-00
Further development requiredCustom night-channel rail design reference using source-matched infrared filters in chip, strip, cap or rail form. Specify NVIS class and output color separately. Define full light sealing, source spectrum, filter thermal clearance and assembly radiance test. No released or qualified design is represented. Development reference — further design or fit verification required. No target LCD has been selected. Confirm mechanical, electrical, optical and thermal compatibility before release.
LRA / Custom Dual-Mode Day and NVIS Night LED Rail / Design Reference
PN: LRA-03003-00
Further development requiredCustom rail with separately driven day and filtered night channels. Define optical isolation, drive leakage, source/filter geometry and thermal design. Check phosphor fluorescence from unpowered day LEDs. No completed or qualified assembly is represented. Development reference — further design or fit verification required. No target LCD has been selected. Confirm mechanical, electrical, optical and thermal compatibility before release.
OSRAM white LEDs (5 references)
Side-emitting and top-emitting selections for evaluation. Confirm exact ordering code, bin, footprint, drive current and thermal limits.
Package image from the manufacturer datasheet.
OSRAM Micro SIDELED 3010 / LW Y8SD-T2V1-IK0ML0 / White LED
PN: LED-03001-00
Side-emitting white LED; ordering code Q65113A7341. Intensity 355–900 mcd at 10 mA. Typical forward voltage 2.80 V at 10 mA, solder point 25°C. Nominal package 3.0 ×1.1 ×1.2 mm; 120° horizontal and vertical emission. Current manufacturer page lists full production. Verify bin and PCB/optical fit.
Package image from the manufacturer datasheet.
OSRAM Micro SIDELED 2808 / LW Y1SG-BFOO-EKFM-1 / White LED
PN: LED-03002-00
Side-emitting white LED; ordering code Q65111A8461. Minimum intensity 1600 mcd at 20 mA. Nominal package 2.8 ×1.2 ×0.8 mm and 120° emission. Current manufacturer page lists full production. Confirm chromaticity bin, footprint and derating for the rail.
Package image from the manufacturer datasheet.
OSRAM Micro SIDELED 3806 / CUW Y3SH.B2-GFJD-5J6T-Z242-Z / White LED
PN: LED-03003-00
Side-emitting white LED; ordering code Q65113A2530. Flux 9.75–11.5 lm at 20 mA. Nominal package 3.8 ×1.0 ×0.6 mm with 120° emission. Current manufacturer page lists full production. Confirm exact bin and light-guide coupling.
Package image from the manufacturer datasheet.
OSRAM DURIS E 3 / GW JCLPS2.EM-H3H8-A131-1-2 / White LED / 6500 K
PN: LED-03004-00
Top-emitting white LED; ordering code Q65112A8486. Flux bin 31.5–40.5 lm at 65 mA, 6500 K. Nominal package 3.03 ×1.35 ×0.70 mm; 120° emission. Current manufacturer page lists full production. Candidate for a custom rail or direct-lit board; evaluate coupling rather than assuming a side-emitter replacement.
Package image from the manufacturer datasheet.
OSRAM DURIS E 3 / GW JCLPS2.EM-H3H8-A333-1-2 / White LED / 5000 K
PN: LED-03005-00
Top-emitting white LED; ordering code Q65112A8484. Flux bin 31.5–40.5 lm at 65 mA, 5000 K. Same package family as the 6500 K option, with separate color selection. Current manufacturer page lists full production. Verify complete ordering/bin code and thermal design.
From candidate to fitted rail.
Send the LCD model, rail-channel dimensions, light-guide thickness, emitting height, connector and driver information. For dual-mode work, include separate day/night operating levels and the required NVIS class and colors.
Rail batches are lot-tracked. The final configuration and applicable inspection evidence are established through development.